Influence of Printing Angulation on the Accuracy (Trueness and Precision) of the Position of Implant Analogs in 3D Models: An In Vitro Pilot Study

doi:10.3390/app14072966

AutoresNoelia García, Miguel Gómez‐Polo, Miriam Fernández, José Luis Antonaya-Martín, Rocío Ortega, Cristina Gómez‐Polo, Marta Revilla‐León, Rocío Cascos

Por qué importa

Este estudio in vitro investiga cómo la orientación de impresión de modelos dentales 3D, fabricados mediante manufactura aditiva, influye en la precisión posicional de los análogos de implantes. La correcta ubicación de estos análogos es crucial para la posterior adaptación de las prótesis implantosoportadas, dado que su colocación manual puede introducir errores. Los resultados sugieren que una angulación de impresión de 45 grados mejora tanto la exactitud (trueness) como la precisión (precision) en comparación con orientaciones de 0 o 90 grados. Esta información es relevante para los profesionales que utilizan flujos de trabajo digitales y la impresión 3D en la planificación y fabricación de restauraciones implantológicas, optimizando la fiabilidad de los modelos de trabajo.

Abstract original

Background: With CAD-CAM, dental models are often fabricated by additive manufacturing (AM) methods. Dental models for implant prostheses involve the manual placement of analogs, which could affect their final fit. Therefore, in this experimental in vitro study, the accuracy of the analogs’ position in models printed using AM methods was examined by comparing three different printing orientations. Methods: An STL file was obtained by scanning a master model with an implant placed in the maxillary left central incisor position. Three study groups (n = 10) with varying printing orientation parameters were obtained (0, 45, and 90 degrees). They were digitalized with a laboratory scanner and evaluated with an analysis metrology program. Differences between 3D datasets were measured using the RMS for trueness and SD RMS for precision. The data were statistically analyzed using the ANOVA test at a significance level of p < 0.05, followed by the Bonferroni post hoc test. Results: The 45-degrees group showed the best results. Regarding trueness, statistically significant differences were found between the 45- and 90-degrees groups (p < 0.005). In terms of precision, statistically significant differences appeared between the 45- and 0-degrees groups (p < 0.011) and between the 45- and 90-degrees groups (0.003). Conclusions: The printing angulation parameter affects the accuracy of 3D-printed models. Implant models manufactured at 45 degrees of printing angulation are more accurate than those printed at 0 or 90 degrees.

Leer texto completo ↗DOI · 10.3390/app14072966

Autor Doctor&Cols

Jose Luis Antonaya Martín
Rehabilitación Oral y Estética Dental

Cómo citar

García N, Gómez‐Polo M, Fernández M, Antonaya-Martín JL, Ortega R, Gómez‐Polo C, et al. Influence of Printing Angulation on the Accuracy (Trueness and Precision) of the Position of Implant Analogs in 3D Models: An In Vitro Pilot Study. Applied Sciences. 2024. doi:10.3390/app14072966